P-10c

Danger Close Armament applied their tried and tested Signature service to the CZ P-10 C. The DCA treatment of Brain texture with recessed borders provides a rock solid grip on the pistol in all conditions without being overly abrasive. The CZ P-10 C slide milling package includes top cocking serrations, providing enhanced traction, and features slide porting.  The slide is then finished with an extremely durable Nitride coating.  A cohesive and functional CZ P-10 C package ready for every day carry.

Features:

  • Signature Frame Package
  • CZ P-10 C slide milling package
  • Nitride slide coating
  • Silicon Carbide Grips

Specifications

  • Chambering: 9mm Luger
  • Magazine Capacity: 15+1
  • Frame: Fiber-reinforced polymer
  • Trigger Mech: Striker
  • Sights: Front tritium night sight, rear serrated combat sight
  • Barrel Length: 4.0 in
  • Width: 1.26 in
  • Weight: 26.3 oz
  • Overall Length: 7.3 in
  • Safety: Firing Pin Block Safety, Trigger Safety
  • Mags. Included: (2) 15rd Magazines

Modifications:

TRIJICON RMR SIGHT ADJUSTABLE – 6.5 MOA RED DOT TYPE 2

 

 

 

 

 

 

P-10c

Built for use with suppressors, the P-10 C Suppressor-Ready has an extended/threaded barrel with 1/2×28 threads. High fixed sights and extended magazine capacity round out the package. One change that happens on both the US-made and Czech-made P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly. First order of business, ergonomics. Anyone who’s picked up a CZ 75 for the first time gets it — it just has to feel right in the hand. With the CZ grip angle, the P-10 avoids that ‘brick-in-the-hand’ feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10 fit a wide variety of hands as if it were built for them. Because it was. Next up, trigger. So many striker-fired pistols do many things right, falling short when it comes time to pull the trigger. The P-10’s trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb pull and rebounds with a short, positive reset — meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical 3-dot sights allow for one-handed manipulation of the slide on a belt. Take-down of the P-10 will be familiar to most fans of striker-fired guns, and even more pleasing will be holster compatibility with some of the most common guns on the market.

Specifications:

  • Caliber: 9mm Luger
  • Magazine: (2) 17rd
  • Frame: Fiber-reinforced Polymer
  • Trigger Mechanism: Striker
  • Sights: High Fixed Sights
  • Barrel: Cold Hammer Forged
  • Barrel Length: 4.61″
  • Weight: 26 oz
  • Overall Length: 8.0″
  • Safety: Firing Pin Block Safety, Trigger Safety

Modifications:

KILLER INNOVATIONS VELOCITY CZ P-10 C/F TRIGGER

KILLER INNOVATIONS VELOCITY CZ P-10 MAGWELL

 

 

 

 

 

 

P-10c

Much more than just our take on the striker-fired pistol, the P-10 is decidedly CZ, from the way it feels to the way it shoots. First order of business, ergonomics. Anyone who’s picked up a CZ 75 for the first time gets it — it just has to feel right in the hand. With the CZ grip angle, the P-10 avoids that ‘brick-in-the-hand’ feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10 fit a wide variety of hands as if it were built for them. Because it was. Next up, trigger. So many striker-fired pistols do many things right, falling short when it comes time to pull the trigger. The P-10’s trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb pull and rebounds with a short, positive reset — meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical 3-dot sights allow for one-handed manipulation of the slide on a belt. Take-down of the P-10 will be familiar to most fans of striker-fired guns, and even more pleasing will be holster compatibility with some of the most common guns on the market. One change that happens on both the US-made and Czech-made P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly.

Specifications:

  • Chambering 9mm Luger
  • Magazine Capacity 15+1
  • Frame Fiber-reinforced polymer
  • Trigger Mech Striker
  • Sights Metal Three-Dot
  • Barrel Cold Hammer Forged
  • Barrel Length 4.02 in
  • Height 5.2 in
  • Width 1.26 in
  • Weight 26 oz
  • Overall Length 7.3 in
  • Safety Firing Pin Block Safety, Trigger Safety
close button